This story will be continually updated as new information is learned. The most recent update was published on 5/17/19.
After decades of speculations, concepts, and renderings, a mid-engine version of everyone's favorite American sports car, the Chevrolet Corvette, is finally on its way. This evening, Chevrolet officially acknowledged that the car is real, and told us when we'll see it in person.
The C8 Corvette Will Officially Debut on July 18, 2019
Chevy on the evening of April 11th. It's the first official acknowledgement that the mid-engine Corvette is real, and the date on the side corresponds with . It's official: We'll see this thing for real on July 18th.
General Motors CEO Mary Barra announced the C8's debut at a charity event in New York City honoring firefighters and first responders killed in the attack on the World Trade Center on September 11th, 2001.
The automaker also tweeted a link to , confirming the debut date:
Chevy didn't give any further details aside from the debut date, but the automaker did publish its first official photos of a mid-engine 'Vette prototype cruising around New York City:
It Sounds Like This
Someone in Detroit () captured a camouflaged C8 on the highway briefly letting it rip in gear. Unsurprisingly, it's a V-8 exhaust note coming from the Corvette's quad tailpipes here. It's a great sound—more growly than that of the C7 Stingray, which might simply be a function of exhaust tuning.
On Instagram, the National Corvette Museum has a clip of a C8 testing, too, this time at lower speed, but still with lots of good engine note.
Its Plant Is Getting a Second Shift
GM just announced that the Bowling Green, Kentucky plant where the Corvette has been built for almost 40 years will get a second shift and over 400 more employees to build the C8. It's not clear if this is because GM anticipates additional demand for the C8, or if it's going to slow production down to keep quality high.
It Could Start Between $60,000 and $70,000
that the C8 will start in the $60,000 to $70,000 range, where it'll be equipped with a new version of the current Corvette's naturally aspirated LT1 6.2-liter V-8. This engine, likely dubbed LT2, should make around 500 horsepower—up from the LT1's 460 horsepower.
It Could Get a Fancy New V-8
A 500-hp V-8, good though that may be, is only where things should start. Hagerty thinks that Chevy is working on a twin-turbo overhead-cam V-8 for the C8, possibly with a flat-plane crankshaft.
An All-Wheel Drive Hybrid (!) Is a Possibility
In an August 2016 report, the Detroit News said the mid-engine Corvette is codenamed "Emperor," and that a hybrid version could be in the pipeline. Speaking to the Detroit News, Bob Lutz speculated that the mid-engine Corvette could have a small battery and electric motor to decrease fuel consumption and enable all-wheel-drive. Over at Hagerty, Sherman reports the same thing, adding that an electric motor driving the front wheels would replace the front trunk in base C8 models.
It Might Be Dual-Clutch Only
While GM has filed a patent for a clutch-by-wire system that replaces the traditional hydraulic master- and slave-cylinder mechanism with an electronic actuator, many signs point to the C8 being a dual-clutch only affair.
Back in 2016, that the C8 would use a seven-speed dual-clutch gearbox sourced from Tremec. Of its seven speeds, the top three are overdrives, and Tremec says it can handle 9000 rpm input speed and 664 lb-ft of torque.
Car and Driver argues that Chevy will only offer this Corvette with one gearbox to reduce cost and complexity, but a world without a manual-transmission 'Vette is hard to imagine. Still, a dual-clutch would be a big improvement over the current Corvette's eight-speed auto.
It Will Have an Interesting Engine Cover
Chevy's first mid-engine Corvette is a prime chance for Chevrolet to innovate. A recent patent application shows that the engine cover is a design that Chevrolet has spent a lot of time innovating. The design has been made to aid cooling, which might be why the rear of the car has been covered so much in testing. See full details here.
Here's Its Key
Hey look, it has a key!
It Might Have a Targa Roof
Looking at a batch of photos of the C8 Corvette testing on the Nürburgring, our colleagues at Car and Driver —two distinct cut lines on the roof. They speculate that the mid-engine 'Vette has a removable roof panel. That's not the world's biggest surprise, as all Corvettes since the late 1960s has featured pop-out roof panels—save for the C5 Z06 and fixed-head coupe, and the C6 Z06 and ZR1.
We're not sure if this means Chevy won't do a conventional convertible version of the Corvette, but that's hard to believe. Then again, this car will break with a lot of traditions.
It's Going Racing, Possibly with V-6 Power
While prototypes are out on public roads doing testing now, the racing version of the C8 spotted at Road America getting ready for the 2020 season. As with all Corvette race cars dating back to the C5-R, the C8.R will be built by Pratt and Miller and entered into the IMSA WeatherTech Series. A run at the 24 Hours of Le Mans in 2021 is possible, too.
Audio from the C8.R's test sessions reveal a car that sounds quite different than the thundering C7.R, leading us to wonder if this car has a V-6, or perhaps a flat-plane V-8.
It's Been a Long, Long Time Coming
There have been rumors about Chevrolet developing a mid-engine Corvette for half a century. Indeed, Chevy has built a number of mid-engine concepts through the years, only to abandon them somewhere in development.
The first official prototype (pictured above) was revealed all the way back in 1970, and it was nearly production ready. In 1986, GM showed off the Corvette Indy, complete with a mid-mounted twin-turbo V-8 and all-wheel-drive. Then, in 2002, Cadillac revealed the stunning Cien concept at the Detroit Auto show. In between the Cien's axles, behind the passengers, was a 7.5L V-12 with 750 horsepower. It wasn't branded as a Chevy, but industry watchers took it as a sign that GM wanted to do something big.
In 2004, it was decided that the Corvette had reached the limit of grip with the traditional front engine, rear-wheel-drive layout. As legendary GM product guy and R&T contributor Bob Lutz explains, the design team got as far as constructing two full-scale clay models, a Corvette and the equivalent Cadillac XLR, both with the engine in the middle. Sadly, the recession of 2008 (and GM's eventual government bailout) caused the automaker to put a hold on, and eventually cancel, this mid-engined Corvette project. Now, things are different.
It's Going to Take the Fight to the 911 Turbo S
Our spy photographers caught three mid-engine Corvette prototypes testing in southwest Michigan alongside a Porsche 911 Turbo S in 2017. The Corvette and 911 have always been rivals, but benchmarking a Turbo S indicates that Chevy is trying to make a true everyday supercar.
The Design Would Be Pretty Different
Since the engine is going to be sitting behind the cabin, the car will look quite different from the traditional Corvette layout. Just check out these spy photos for proof.
A mid-engine layout would give the Corvette very different proportions than we're used to, but it does appear that some trademark styling details are present. The roofline and windshield look distinctly Corvette, for example, as do the quad taillights.
The Performance Will Be Even Better
The only reason the Corvette would switch to a mid-engined layout is for performance. Engineers at GM understand that there is a limit to how much power a front-engine supercar can put down, and how much cornering grip it can achieve. Although the current Corvette is a fantastic sports car, it's inherently held back by its front-mid-engine layout. With the engine in the middle, the car's weight distribution can be optimized, with turn-in and corner holding capabilities benefitting as a result.
The mid-engine Corvette has long seemed like a fantasy, a daydream promoted by automotive journalists, Corvette loyalists, and those who want to see an American automaker finally build a direct competitor to the likes of Ferrari and Lamborghini. Recent evidence suggests that this wish could finally come true. While we're hesitant to call it a sure thing, we think there's a strong likelihood it could happen. And we can't wait to get our hands on it.
It Could Be Called Zora
A member of recently discovered that Chevrolet has begun to trademark the name "Zora" in several different countries, including the US, the UK, China, Japan, and Australia. If you're not familiar with the name, Zora Arkus-Duntov was the GM engineer responsible for much of the early Corvette's development, engineering, and racing success. He worked on the Corvette program from 1953 up until his retirement in 1975 at the age of 81 years old. Though he didn't create the car, he's known throughout the car world as the "father of the Corvette." It's worth noting he was also a successful racing driver, taking class victories in the 1954 and 1955 24 Hours of Le Mans.
s that the "Zora" name will be reserved for a high-performance version of the C8, while indicate that a version could retain the Stingray name of the base C7.
Here It Is Testing in California
This video, shot by Driven Car Reviews on YouTube, shows a fleet of five mid-engine Corvette prototypes testing in the snow-covered mountains of California. The cars were joined by two C7-generation Corvettes (a coupe and a convertible), as well as a last-gen naturally aspirated Porsche 911 Carrera S.